McLaren P1 latest details
McLaren P1 latest details, including the lowdown on its F1-inspired design
The McLaren P1 has just been revealed at the Paris Motor Show.
The P1 shown here is a design study that’s “about 95 per cent correct”
as to what the production model will look like when it makes its debut
at the Geneva Motor Show in March 2013.
McLaren calls the P1 its “ultimate supercar,” and while it refused to
reveal anything about the car’s powertrain, aside from stating that the
definitive engine and transmission specification hasn’t quite been
finalized yet, the firm did confirm that the P1 will develop “over
592bhp per tonne.” We expect the car to produce in excess of 700bhp, and
be boosted by an F1-style KERS system too.
Talking about the car, McLaren Automotive Managing Director Antony
Sheriff said, “Our aim is not necessarily to be the fastest in absolute
top speed but to be the quickest and most rewarding series production
road car on a circuit.”
To that end, the P1 is packed with ideas taken from McLaren’s 50-year
racing heritage. The design was honed in McLaren’s wind tunnel and CFD
software was used extensively to ensure that the P1’s shape is as
aerodynamically efficient as possible.
The frontal area has been kept to a minimum, so the main intakes for
the engine are in the doors, rather than the P1’s nose. The windscreen
and roof form a teardrop shape, giving good visibility while also
maintaining a clean flow of air to the active rear wing.
Just like a current F1 car, the wing has two settings. In drag
reduction mode it lies flat, minimizing drag and maximizing speed, while
the wing can extend rearwards by up to 300mm on a racetrack, and by up
to 120mm on the road, in High Performance mode.
The wing works in tandem with flaps which automatically open and
close ahead of the front wheels, controlling the air flow around the
car. McLaren claims that the P1 generates 600kg of downforce at 150mph,
the same amount as the MP4-12C GT3 racer.
The P1’s design has been honed to leave the bodywork stripped to a
bare minimum. The front and rear ends of the car are formed from huge
carbon fibre clamshells which are designed to wrap the P1’s mechanicals
as closely as possible to save weight.
The lights have been pared back too, with the fronts being all LED
units which feature daytime running lights in the shape of McLaren’s
logo, while the novel rear LED light strips, which will make production,
mean that a large honeycombed area can be used for cooling the engine.
Underneath, the P1 uses a development of the carbon fibre MonoCell
used on the 12C. Called the MonoCage, it adds a carbon fibre loop into
the roof, which serves both as a roll bar and as the location of the air
scoop which feeds air to the mid-mounted engine.
In a nod to the original McLaren F1, the P1 features gold leaf heat
shield around the exhaust, as gold is simply the best material for
reflecting heat despite the cost implications.
The P1 will go head-to-head with the Porsche 918 and next Ferrari Enzo, so expect a prices to start somewhere around £700,000.( Sumber Auto Express )
+ komentar + 1 komentar
great
Posting Komentar